7,500+ items available from stock
Best price guarantee
Your partner for astronomy
Mounts & accessories > Mounts > Equatorial with GoTo > 10 Micron > HPS > 10 Micron Mount GM 1000 HPS GoTo
Product no.: 25288

Mount GM 1000 HPS GoTo

$ 12,600.00 incl. VAT, plus shipping costs
too expensive?
short-term
ready for shipping in 1-2 weeks + lead time

Product description

More about the series HPS...

The GM 1000 HPS (High Precision and Speed) mount is an advancement of the well-known GM 2000 QCI by 10Micron with the same tried and tested mechanics! The new GM 1000 HPS also has high-precision absolute encoders on both axes which opens up completely new possibilities. Homing the telescope can be omitted since the mount never loses its orientation, even when the axes are moved manually. Even after a power cut, the alignment does not need to be repeated. The mount can be set up for mobile use more quickly and simply than all conventional equatorial mounts. For fixed installation in an observatory, you can rest assured that you will not lose alignment during remote operation.

Key information: Thanks to the absolute encoder, positioning and tracking can be achieved to within one arcsecond (tracking precision of around 1"/15min (peak to peak)) - without the disadvantage of needing to buy a powered (torque) mount to access this convenience! The dual-axis tracking enables tracking to take place even when it is not precisely orientated also correcting the atmospheric refraction. Autoguiding is no longer necessary!

Furthermore, the GM 1000 HPS is also suited for satellite tracking thanks to the high slew rate of 20°/s

Thanks to the integrated Linux processor, everything can be controlled through the hand-controller without an external PC!

The HPS series: True precision for your astronomical future Take photographs without autoguiding, track satellites, find exoplanets using high-precision spectroscopy - and all with portable equipment!

GM 1000 HPS: - 25kg load capacity

GM 2000 HPS: - 50kg load capacity

GM 3000 HPS: - 100kg load capacity

GM 4000 HPS: - 150kg load capacity

MECHANICS

  • Self-locking, high-precision worm drive with classic sliding clutch
  • DC high-powered servo motor - no stalling due to imbalance
  • GM 1000 HPS with integrated high-precision encoders for portable stand-alone operation
  • Internal wiring - no external motor cables

ELECTRONICS

  • Absolute encoder installed in both RA and DEC axes with more than 10 million increments (interpolated), fully encapsulated and calibrated
  • RMS tracking precision up to 0.5“ - for long exposures without guiding!
  • Satellite tracking speed of up to 20 degrees per second!
  • Extremely low energy consumption, small electronics box (20x15x8cm)
  • The electronics (box and hand-held controls) can be simply removed after each use. This prevents damage due to premature ageing and moisture.

FIRMWARE

  • Fully automatic correction of atmospheric refraction - the only way to get perfect long exposures without guiding
  • Intuitive V 2 firmware and QSI controller, with Linux-based computer system incl. AMD microprocessor.
  • Precise GoTo - thanks to the Multistar alignment system and pointing models. Possibility to import satellite and comet orbits from web directories. Multiple individually programmable observation sessions
  • Very well documented firmware, German and English instructions
  • Autonomous operation without planetarium software, stand-alone operation using the hand-controller
  • Option to connect to all common planetarium software for remote operation (LAN, RS).
  • Electronic balancing - without opening the axes (pointing model is preserved)
  • Precise, fast and extremely accurate polar alignment thanks to the latest alignment software

INTERFACES

  • RS232, Ethernet, Wi-Fi
  • Connections for: GPS, autoguider, keypad, mount, AUX and remote switch
  • PC software: Virtual Keypad, Clock Sync Tool, Multi Mount, ASCOM drivers

Scope of delivery:

  • GM 1000 mount with high-precision absolute encoder
  • Motor control box with Linux processor for stand-alone operation
  • Latest QCI software
  • Cable
  • Counterweight shaft
  • Professional 4-row stand-alone hand-controller
  • Tripod/shaft flange
  • Standard mounting plate for GM1000
  • Shipping box with moulded foam padding

Specifications

Capacity


Designation
GM 1000 HPS
Max. additional load capacity (kg)
25
Polar elevation setting (°)
0-82
Slow-motion azimuth adjustment (°)
+/- 7,5°
Motor speeds
0,5
Position precision
< 20"
Precision of tracking
1"/15min
Material of worm wheel
Bronze
Axle bearings
Taper roller bearings
Counterweight(s) (piece)
0 (optional)
Material of counterweights
Stainless steel
Interfaces
RS–232 Port; GPS Port; ST-4 Standard Autoguiderport; Ethernet 10/100/1000 Port
Power consumption in open circuit (mA)
500
Diameter of counterweight bar (mm)
30
DEC axis diameter (mm)
30
RA axis diameter (mm)
30
RA worm gear diameter (mm)
125
DEC worm gear diameter (mm)
125
DEC worm shaft diameter (mm)
20
Worm gear teeth (DEC) (piece)
250
Worm gear teeth (RA) (piece)
250
Material of worm gear
Steel
RA worm shaft diameter (mm)
20
Motor type
Servomotors
Slewing speeds
2 - 15
Power supply
24
Power consumption (mA)
max 4000
Mounting saddle
Losmandy & Vixen
Weight mount head only (kg)
19,5
Drive type
Worm wheel

Special features


Polar axis scale
yes
PEC correction
yes
GoTo system
yes
Controllable via PC
yes
Updateable via web
yes

Equipment


Tripod
without tripod

General


Series
HPS
Total weight (kg)
21
Type
Mount
Type of build
Equatorial

Area of application


Useful for photographs
yes (very good)

GoTo control


WIFI
yes
GoTo Language
multilingual
Interfaces
AutoGuider, Aux, RS232
GPS
optional
Hand Controller
10 Micron

Recommended accessories

Telescope accessories > Cables & power supplies (5)
Power pack

10 Micron Stationary, stabilized power supply for GM1000 HPS

$ 203.00*
Telescope accessories > Other (2)
no image

10 Micron Cover for equatorial head

$ 109.00*
Mounts & accessories > Tripods & Mounts (4)
Tripod

10 Micron Tripod Aries 60cm

$ 3,320.00*
Mounts & accessories > Mounting plates and rails (3)
no image

10 Micron 3" / 300mm rail for 3" clamping plate

$ 122.00*
Mounts & accessories > Controls (3)

10 Micron 'Perseus' PC planetarium and telescope control software

$ 191.00*
Mounts & accessories > Miscellaneous (5)

10 Micron Cordura cover

$ 101.00*
Mounts & accessories > Other (2)
Counterweight

10 Micron Counterweight 3 kg

$ 137.00*

*All prices include VAT plus shipping costs.

10 Micron Mount GM 1000 HPS GoTo
Incredibly precise tracking
10 Micron Mount GM 1000 HPS GoTo
Example of use

Customer reviews

There are no customer reviews for this product yet.

Compose your own review

Do you have specific questions about your order or products? Please contact our customer service!

Customers who bought this product also bought...