In brief:
- Can work with equipment weighing up to 12 kg
- Only 16 mm thick
- Can be used with a wide range of software
- Max. speed of 6.0 degrees/s
The Wanderer Rotator PRO M92 is a large-field rotator for flat and very light cameras.
Despite its manageable size, it can lift equipment weighing up to 12 kg while remaining highly accurate. (Please note: the load capacity of the rotator must be calculated based on the distance to it; for example, at a distance of 10 cm from the centre of gravity, the load capacity drops to 6.34 kg).
This rotator is only 16 mm thick, including the M92x1 plug and socket attachments.
It can be connected to a computer/laptop using a USB 3.0 cable, which can be used as a power supply for two additional USB 3.0 instruments and a DC OUT 12V connection. Power is then supplied via a [email protected] cable at max. 12V 8A.
Both rotator openings have an M92x1 thread (one socket and one plug). The rotator can be installed in both directions. The M92x1 external thread is removable and has 8x M2.5 threaded holes that can be used to install mechanical accessories for your setup.
The rotator can be easily used via the ASCOM driver with the Wanderer software from Artesky or third-party software (NINA, SGP, Voyager).
