Astronomik XT filters for wide-angle lenses: The new Astronomik XT filters have been specially developed for astrophotography with wide-angle lenses and deliver sharp star images right into the corners of the image.
Astronomik clip-on filters have been a popular and well-known accessory for astrophotographers around the world for many years. However, when using lenses with very short focal lengths for wide-angle photography, standard clip-on filters can cause aberrations, and the stars in the outermost corners of the image become streaked. To solve this problem, the new Astronomik XT filters are mounted on an extremely thin substrate with a thickness of only 0.3 mm or 0.5 mm, which significantly reduces these aberrations.
Despite their reduced thickness, Astronomik XT filters offer the highest optical quality: they are finely polished, free of streaks, internal stresses and bubbles, and suitable for the most demanding applications.
Astronomik XT filters are manufactured using the same durable coating technology as all Astronomik filters. They are extremely scratch-resistant, insensitive to high humidity and non-ageing. This ensures that they maintain their performance for years to come.
Please note that not all Astronomik filters are available as XT versions, as the manufacture of these extremely thin filters is very complex. Currently, filters are being produced that are ideal for photography with wide-angle lenses.
SII: This filter is suitable for photographing SII regions from light-polluted areas, but also from locations with dark skies. The contrasts between objects that glow in the light of the sulphur line at 672 nm and the sky background are greatly enhanced.
By combining a low half-width with high transmission of almost 100% in the SII line range, the filter delivers maximum signal in the desired wavelength while blocking all other radiation, ensuring an extremely dark sky background.
The half-width of 6 nm is optimally matched to the use of CCD and CMOS sensors with particularly low dark current. The 6 nm filters are the first choice when observing from a location with extreme light pollution or generally whenever faint objects are to be recorded in very starry areas of the sky.
MRF-coating: thanks to the new MFRF coating technology, it is possible to use the filter on all devices up to an aperture of f/4.
Alternative: The line filters with 12nm full width at half maximum are interesting if you are using a DSLR or a CCD camera with a higher dark current. The 12nm filters are also the best choice if your camera has a built-in guiding chip, because when using the 12nm filter you typically have twice as many stars in the image.
Please note: In principle, all camera lenses can be used with the Clip-Filter - i.e. Canon EF lenses or camera lenses from other third party manufacturers such as Sigma, Tamron, Tokina, Walimex etc. However, the use of clip-filters with Canon EF-S lenses is NOT possible!
A bit of help with your selection:
- As a first filter, we recommend the Astronomik CLS filter. This filter suppresses artificial light pollution and natural airglow. By using this filter you get a dark-sky background and can therefore use much longer exposure times to make fainter objects visible. The filter is optimised in such a way that objects are reproduced in their natural colours. Important: the simple CLS filter has no built-in IR-blocking. Therefore you will need the CLS-CCD filter for an astro-modified camera!
- A good choice for working in locations with really heavy light pollution is the Astronomik UHC filter. The transmission curve of this filter only allows the light of the H-beta, OIII, H-alpha and SII lines to pass through. The background suppression is significantly stronger than with the CLS, however this filter works only for gas nebulae! Star clusters and galaxies are largely filtered out.
- For a more in-depth introduction to astrophotography, we recommend the OIII, H-alpha and SII emission lines filters, available with full width at half maximum of 6nm or 12nm. With these filters you can create detailed images of faint objects even from locations with extreme light pollution and a full Moon high above in the sky. Images in these narrow emission lines are not naturally coloured.
- For the owners of astro-modified cameras we offer the Astronomik OWB filter: OWB stands for "original white balance". The filter corrects the displaced colour reproduction of a converted camera so that it can also be used for normal every-day photography, without having to revise every image on the computer.
