New Products

Posts Tagged 'face-masks'

New: fabric masks with attractive astronomy themes

July 13 2020, Marcus Schenk

Whether you are going to the supermarket, the book shop or the public observatory; in all these locations you need to wear a mask. So why not wear one that you really like? Luckily, there are now new astronomy-themed masks. Beautiful images with the Pleiades and the solar corona during an eclipse. As a hobby astronomer and fan of outer space, make a statement with one of these masks.

A great addition to the Masketo fabric mask range, which were previously only available in black or white, in different sizes – including for children – or with the Corona Borealis design.

The solar corona: the Sun is one of the reasons why there is life on Earth. It is only a medium-sized star on the edge of the galaxy, but it is for us – along with our Earth – vitally important. This mask shows a total eclipse of the Sun, which occurs when the Moon moves in between the Earth and the Sun. By an absurd coincidence, the Moon and the Sun appear to be the same size in the sky, which allows us to marvel at the solar corona depicted on the mask during a total eclipse.

Solar corona

The Pleiades: the Pleiades were recognised in the sky even in the very early days, as found in a 17,000-year-old rock-drawing in a cave, or in an image on the ancient Nebra sky disk. Some people mistake it for the Little Dipper, but it is the best-known open star cluster in the starry sky. Just 400 light years away, large blue stars and only 100 million years old.

Pleiades

Summer theme: If you simply want to share a little summer with your mask, this one is ideal, with palm trees and fresh turquoise colour accents.

Summer theme

All Masketo masks are non-medical masks that can help reduce the spread of airborne droplets in the Corona crisis.

The benefits:

Themed mask
With elastic loops
2-ply with wire for nose clip
Inner surface 100% cotton + outer surface 100% polyester
Washable at up to 60°C
Made in Europe

Note: these masks serve to reduce the risk of transmission in the environment through airborne infection. This is not a medical product within the definition of the MPG and not personal protective equipment (PPE).

Totally stylish, whether in the observatory or at the astronomy club: be sure to secure your fabric star mask today.

Tags: Corona, face masks
Posted in New Products | No Comments on New: fabric masks with attractive astronomy themes »

Free mouth and nose masks from your 3D printer: How to make your own mask

June 5 2020, Marcus Schenk

It is part of everyday life. We all have to wear a face mask in public from now on. We, therefore, have an unconventional craft tip for everyone with a 3D printer.

With our free downloadable 3D file and a simple tissue, you can quickly make your own makeshift mask.

Once printed you can make up a mask in only a few minutes.

So how does this work exactly?

Normally our production department develops new products and telescopes for our Omegon brand but, due to the Coronavirus outbreak, we are having a rethink. So our developers have designed a holder, using which you can create a sturdy mouth and nose cover using kitchen roll.

But how? You attach two of the four frame sections created in the 3D printer to the outer edges of the sheet of kitchen roll. Even a sharp tug will not tear the paper, it will remain sturdy. You can then attach a rubber band to the sections of frame and, voila, you have a mask!

And this is how it works:

Download the files Holders.stl and Top.stl and save them to a card which is suitable for your 3D printer.

Download Holder

Download Top

Place 1x Holders.stl and 2x Top.stl into the work area and start the 3D print.
Around 3 hours later you will have the following components:

Holder für die Mund- und Nasenmaske aus dem 3D-Drucker

One of two upper sections, each of which clicks into a lower section with the inlaid paper.

Step-by-step guide to making your mask:

Lay out one disposable tissue and two sheets of kitchen roll. Ensure that you use a good quality tissue – it should be thick and dense enough not to become saturated. Lay one sheet of kitchen roll in front of you and place the other on top of it at a 90 degree angle. Finally place the unfolded tissue on top.

Cut both sheets of kitchen roll to the same size as the tissue.
Using the tissue’s folds as an aid, create three mountain folds in order to achieve the classic mask design. Pinch the creases together at the sides (as shown in the image) and place the crease towards the top edge. Do the same with the other folds.

The folds should resemble those in the following image:

Now take a standard hole punch and punch holes in the right and left-hand sides.

Find a rubber band and cut it into 20 centimetre sections. The holders have a small hole at one end and a tapered slit at the other end to hold the rubber band. Tie the rubber band at one end, feed the other end through the small hole and pull the band through until it stops at the knot. Feed the untied end into the slit and wedge it in. Do the same with the other rubber band.
Place the mask with the pre-punched holes into the designated holder lugs and attach the mask to the upper sections. Press down firmly, pressing the spikes into the sheets as you do so.

Your mask is now ready and you can try it on as shown in the top image.

Bear in mind that this is only a makeshift mask and you should replace the tissues after use. However, the plastic units which you produced in the 3D printer are reusable.

Note: These masks reduce the risk of transmission due to airborne infection in the environment. This is not a medical product as defined by the Medicinal Devices Act and does not constitute personal protective equipment (PPE).

Enjoy printing and making.

Tags: face masks
Posted in New Products | No Comments on Free mouth and nose masks from your 3D printer: How to make your own mask »

Now available: face masks

May 18 2020, Marcus Schenk

The corona virus is regarded as a cause of the Covid-19 (SARS-Cov-2) disease. The recently-implemented mandatory wearing of face masks helps us to contain the virus. Therefore, we are offering you cotton or polyester non-medical face masks, and special respirators with KN95 filtering effect.

Face masks from MYONE

Cotton face masks

Masketo’s washable fabric masks are black and are made of 100% cotton. This means: you can easily wash them in the washing machine at 60°C and reuse them. The nose clip can be adjusted as necessary, so you can be sure that the mask fits you perfectly. The big advantage over disposable paper masks: they save money, eliminate waste and most people find that breathing through a fabric mask is significantly more comfortable.

The masks from MYONE are also made of 100% cotton, are available in white, and are anatomically designed in sizes M and L. The advantage: they are just as comfortable as the Masketo black masks, however thanks to the design, a nose clip is not necessary. Therefore, you can also sterilize the mask in the microwave.

Note: These masks serve to reduce the risk of transmission in the environment through airborne infection. This is not a medical product within the definition of the MPG, and is not personal protective equipment (PPE).

Respirators with KN95 filtering effect

The respirators with the KN95 filtering effect protect both you and your environment at the same time. According to Wikipedia, they are functionally equivalent to the FFP2 respirators, which are mostly reserved for medical staff. It’s just good to know you’re protected when you are out and about in public. Especially if you have contact with a lot of other people. This makes the KN95 masks great: because 95% of the particles greater than 0.3 μm are filtered.

Masks with astronomical designs

As a hobby astronomer or space fan you absolutely need something like this: face masks with astronomical designs.

Although you could be mistaken: the name of the “Corona Borealis” face masks has really nothing to do with the virus. It is the Latin name of the Northern Crown. The mask features the design of this beautiful constellation with its main star Alpha Coronae Borealis.

Good to know: Soon we will also be offering face masks with other attractive astronomical images.

Every purchase helps to save lives

Many countries have been badly hit by Covid-19, ventilation equipment and medical care is in short supply. How can we help? For every order we will forward EUR 1 to “Doctors Without Borders”. In the Corona crisis, the humanitarian organization fights against death and for life in more than 50 countries. Be a role model and join in: by purchasing a mask you are helping exactly the people who are desperate for your help.

Get your face mask. Now.

Tags: Corona, Covid-19, Masks with astronomical designs, face masks
Posted in New Products | No Comments on Now available: face masks »